SNAP! Pop-Up Displays
Our SNAP! pop-up display system is based on a modular design. The same structural parts can be combined to make many different configurations designed to attract attention at tradeshows, conventions and exhibits. It combines strength, reliability, style and ease of use. It has several unique advantages over other similar portable displays making it simpler to use. First, Rare Earth Neo Magnets snap the symmetrical channel bars into place. Symmetrical channel bars mean you don’t have to figure out top from bottom, just hold them close to the hubs and SNAP - they jump into place. The locking/location system, the pieces responsible for locking the frame in an expanded position, work the same way, making the system one of the quickest and simplest to erect and take down, No parts to break or hinges to fail. SNAP! systems can be configured many different ways, from basic tabletop kits to full 20’ long displays, curved or straight, single or double sided. Combine SNAP with breathtaking, virtually seamless graphic mural panels and you will present a bold memorable message to your customers and prospects.
With 6 Velcro friendly fabric panels $1299
With 4 bFlat graphic panels and 2 fabric end caps as shown $1586
With 4 Lambda graphic panels and 2 fabric end caps (as shown) $1866
With 6 Lambda graphic panels $2124
Everything shown packs into a single molded shipping case. Lights pack in the lid. Snap graphics can be produced on our Lambda so you can get the eyepopping detail and smoothness you just won’t see with fabric displays.
Channel Bar Construction
Channel bars are an aluminum extrusion with ABS plastic caps. The caps are the same at both ends and contain rare earth neo magnetic buttons that mate to matching magnetic buttons on the frame hubs. This arrangement makes setup quick and easy, with accurate locations creating a rigid structure. The magnet on the face of the channel bar is 1” wide and is attached with an adhesive back. The panel magnets are _” wide and have the opposite polarity. This polarity difference locates the panel horizontally again allowing easy accurate panel locations for mural panels.
Hub Construction
Hubs are made of ABS plastic and can be changed out with the removal of 2 or 4 screws depending on the location. Notice the green locator. It works with magnetics like the channel bars for easy setup. Top hubs have a dove tail on top to accept our lights using the universal clamp. Each frame utilizes 3 different hubs: Top, middle and bottom. Top hub has a dove tail on it to accept the lights and only 1 magnet for channel bar attachment, the middle hub has two magnets for channel bar attachment and the bottom hub is the same as the middle but it only contains 1 magnet for channel bar attachment.
Frame Construction Materials
Frame scissors are made out of anodized and clear coated aluminum extrusions. The diameter of the scissor tube is 12mm and the wall thickness is 1.2mm. A scissors is made of 2 tubes approx. 763 mm long and are attached by an aluminum pressed rivet with a nylon washer between. Scissor connect to hubs via screws. There are two types of scissors. One type is with the rivet in the middle (straight) to create the vertical structure for straight and curved frames and the horizontal structure for straight frames. The second type has the rivet off center to create the horizontal structure for the curved frame.
Hanger Bars
Snap! hanger bars utilize a simple molded receiver (green) that locates the panel in the correct vertical position. This combined with the locating feature of the opposing polarity panel and channel bar magnets means your matched panel mural is lined up right from the start. The top frame hubs contain recessed pins the receivers hang on. This arrangement means that, from the front, there is no visible hanger so your graphic maintains that seamless appearance top to bottom.
Display Lights
Two 200W lights are included in the basic pop-up display package. If you are in a competitive situation wanting to be noticed, lighting can be just the edge you’re looking for. Research shows that people’s attention is drawn to the brighter things in their field of vision. If you have a light on your graphic and your competitor doesn’t, you’ll be the one your prospect sees first. Two challenges in using display lights is attaching them to your display and packing them safely for transport. SNAP addresses both issues. The top hubs have a light hanger with a dove-tail fitting. Lights simply slide on and off for use, yet virtually invisible if you decide not to use your lights. The case lid provides the storage. Custom cut-outs in a foam block accept 2 lights and cords.
Snap! Configurations
Because SNAP! is based on a modular design, the same structural parts can be combined to make many different configurations. Here are the ones most frequently used:
Snap Fabric Panel
Color Options
Take a look at Pop up backwall designs by other designers.
Monitor Bracket
Now you can have a Powerpoint, video or demo visible to
passersby on a separate
monitor on your Pop Up.
Click here more info.
$150
Bubble Panel for all Pop up brands
Looking for something new? Add a
Bubble Panel to your existing Pop up!
It’s a great way to add interest or draw
attention to your next Pop up graphic
project.
Pop-out for your Pop-up
Here’s a cost effective way to spice up your next
booth graphic effort, or, call out something new
without having to replace your panels. Fits all pop
ups.
New Pop up Lights for a GREENER effect
Still using those old fashioned Hot Lights to illuminate your POP UP? Take a look our super efficient White LED lights. They’re safer and GREENER. Click here more info.
$290 for 2 lights.
Podium Conversion Case Wrap
Don’t miss this great efficiency. As a podium the case gives you a table surface for literature or lead gathering. It provides another graphic opportunity to reinforce your message. And it overcomes that little detail of case storage once the booth is setup. In no time the savings from not having to pay for storage and drayage to and from the booth will pay for the graphic, not to mention the convenience of not having to make the arrangements and wait for the forklift when the show is over.
$320 for graphic conversion.
Shelf UnitSNAP can include an interior shelf unit. This smart looking option allows you to present products or marketing literature directly from the front face of your display. The shelf assembles in minutes and comes complete with two clear acrylic shelves that can be used either horizontally or at 45 degree angles $435 (Only available for Front Curve configurations and requires separate container for transport)
Cloth carry bag $75
We are distributors for Ultraform - the best manufacturer of lightweight portable exhibit cabinetry in the country. They make lead taking booth stands, reception counters, computer workstations, product displays, demo stations, conference tables, kiosks and towers. All furnishings pack conveniently into blow molded shipping cases. Surprising light, they are sturdy and support substantial weight. They offer a variety of finishes including both fabrics and laminates. Take a look. You’ll be impressed at what they can do. You’ll find pricing and dimensions for each unit. Feel free to call us if you want help with your tour.
Fold-up Literature StandThese stands create a smart looking presentation of your literature with much better visibility than laying horizontal on a table. An added benefit is that literature stores in the display during transport. The 4 literature pockets are constructed of scratch resistant polycarbonate. Comes complete with cloth carry bag.
$170
