Site Search 

Giant Banner Pole

• $795 with full size Flag banner
• $1060 with full size dbl sided vinyl banner shown
• $1280 with full size Dbl Sided Flag
• Stands above any crowd yet very portable
• Accepts conventional banner materials that can be changed at will
• Weighted base means use outdoors as well as in
• Banner swivels in wind reducing resistance for better stability
• Variable height means you buy as much banner as you want

Our Giant Banner Pole is a great option for outdoor and indoor banner displays. It offers an adjustable height up to 16’ and comes with a hollow base with the option of adding either water or sand as a weighting agent. Sets up in 15 minutes. Complete user instructions included. 43” width Banner, height variable, max length 144” Allow 1.5" for #3 grommets along the top and inside edges of graphic.

The base can be weighted with water or sand

 

Conventional banners with Grommets snap into place

Giant Banner Upgrades

“V” Upgrade

$99

“V” Upgrade

Flag Upgrade

$55

Flag Upgrade

Carry Bags
Additional carry bags will store and help transport unit from event to event.
$75

Banners and Sign Printing
EcoSol direct vinyl printing
Jeti UV direct vinyl printing

Flag Material – Flag material is a thin, light weight, polyester material we print with Dye Sublimation Inks. The invasive nature of these phase change inks means that the image printed on one side is quite visible on the other. The good news is that you buy one print and you get 2 usable images, one from each side. The bad news is that the reverse side image is just that, “reversed” or “flopped”. The American flag is a good example of art that is fine in such circumstances. This paragraph of copy is an example of images that will not be fine. The way to overcome the problem is by printing a 2nd image the way you want it and sewing it and a light blocking liner to the back side of your flag. This more than doubles the price, but it does allow you to continue to use the lightweight fabric. as An alternative and you may want to consider is double sided vinyl. More on that below.

Vinyl – Our basic outdoor banner material is a 13oz scrim vinyl with a gloss finish. The term scrim means there is a polyester thread running through the material to add wind strength and tear resistance. The front and back sides are different enough that good printing is only achieved on one side. For double sided uses we have two solutions: The banner can be printed twice and folded back on itself to have two printed sides showing; Or, we have a special double sided vinyl which lacks the scrim thread. This material can be printed on both sides for a good looking single sheet banner. The advantage to a single sheet is weight. The advantage to the fold over is greater strength. As mentioned elsewhere, vinyl banners are printed with our EcoSol inkjet. These inks use a glycol base rather the harmful and toxic VOCs used in normal solvent inks. But there is no compromise in color. As a matter of fact they are better than solvent inks. EcoSol inks have one of the largest color gamuts available in direct vinyl printing. That isn’t a boast, it’s a fact, and one that a spectrophotometer can prove. Tech jargon aside, EcoSol will give you the brightest colors you can get on vinyl banners. A difference you and your audience will see.